Functional purpose

IRUAV APP (Upload Flight Data) allows drone pilots to upload images and related data collected on-site to the cloud platform after completing a drone inspection. The uploaded data serves as the basis for subsequent AI analysis and expert review. Before conducting an inspection, drone pilots must carefully read the 【Operation SOP】 (as shown below). Failure to follow the specified instructions may result in inspection data that cannot be analyzed in accordance with IEC 62446-3.

Choosing Solar Site

Please select the correct Site ID first, then click 【Add】. The system will automatically load the corresponding solar site information.

Input Information

Select the drone inspection date and time, and the system will automatically import the environmental information. Key points are as follows:

• Select the inspection date and time, then click 【Get Weather Data】.
• Adjust the solar irradiance values based on the readings from the pyranometer.
• Select a drone device.
• Drag and drop or select the data from the drone’s SD card into the 【Dual-Sensor Folder】, 【Orthomosaic Folder】, and 【Aerial Photos】 fields. If the wrong data is selected, simply drag and drop the correct data again.

Data Upload

After confirming that the network connection is stable, click 【Upload】. A progress bar will appear on the screen. Please wait until the upload is complete and avoid closing the page during the process. Successfully uploaded data will appear in the upload list.